Axor Citterio 39134XX1 Handleiding voor installatie-instructies - Pagina 5

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Axor Citterio 39134XX1. Axor Citterio 39134XX1 8 pagina's. Widespread lav set
Ook voor Axor Citterio 39134XX1: Onderdelenlijst (1 pagina's)

Axor Citterio 39134XX1 Handleiding voor installatie-instructies

Install the pop-up drain

Remove the plunger assembly.
Unscrew the drain outlet flange from the tee.
plunger
Unscrew the tailpiece from the tee. Wrap the
threads with plumbers' thread tape and replace.
height adjuster
Install the white, flexible sealing gasket to the
flange. Place it in the sink outlet.
flange
From under the sink, install the black mack gas-
ket, white friction ring and retainer nut to the
flange. Do not tighten the nut against the bottom
of the sink at this time.
sealing gasket
Thread the tee and tailpiece to the flange. The
pivot must face the faucet. If necessary, turn the
mack gasket
drain assembly.
Tighten the retainer nut.
friction ring
pull rod
Place the plunger assembly in the drain.
retainer nut
Install the horizontal rod so that the end goes
through the loop in the bottom of the height
adjuster.
tee
Install and hand tighten the pivot ball nut.
pivot ball nut
Attach the swivel connector to the end of the
horizontal rod.
Attach the swivel connector to the end of the
pull rod. Position as desired and tighten with a
small, flathead screwdriver.
horizontal rod
swivel connector
5