ARCCAPTAIN ARC160 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ARCCAPTAIN ARC160. ARCCAPTAIN ARC160 15 pagina's. Inverter welding machine

4. OPERATION AND DESCRIPTION

1. Current knob: Welding current, arc-force current and hot

start arc igniting current can be adjusted from low to high by

rotating the knob clockwise.

: It is MMA mode where electrode diameter cannot be

adjusted but arc-force and hot start can be adjusted with

indicator on.

3. "SYN": It is MMA synergic mode where the hot start

current and arc-force current are selected automatically by

program after specified electrode is selected with indicator

on.

: It is lift TIG welding mode with indicator on.

selecting indicator. When the triangular symbol is on, the

corresponding diameter is selected.

Hot start current and arc-force current are selected

automatically by program at this time.

6."A": MMA welding current status indicator. When it is

blinking, MMA welding current can be set at present.

: MMA arc-force adjusting indicator. When it is blinking,

arc-force current can be set at present.

: MMA hot start adjusting indicator. When it is blinking,

hot start current can be set at present.

indicator which is scrolling displaying during welding.

10.

LED digital display：

① ， LED digital tube displays current value which is set

currently;

② ， It displays setting value of arc-force when arc-force

indicator is blinking;

③，It displays setting value of hot start;

④， It displays E60 when machine is under overheat protection

and stops working until E60 disappears;

⑤ ， It displays E13 when machine is under over-current

protection which means internal components are damaged,

please contact dealer for help.

11， Welding Mode: following welding modes can be switched

: MMA synergic electrode diameter

: It is welding status and current setting

Pic 3

Pic 4