ABB LP Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ABB LP. ABB LP 18 pagina's. Linear piston actuators

WARNING notices as used in this manual apply to hazards or unsafe practices which could result in

personal injury or death.

CAUTION notices apply to hazards or unsafe practices which could result in property damage.

NOTES highlight procedures and contain information which assist the operator in understanding the

information contained in this manual.

All software, including design, appearance, algorithms and source codes, is owned and copyrighted by

ABB Inc. or its suppliers.

WARNING

INSTRUCTION MANUALS

Do not install, maintain or operate this equipment without reading, understanding and following the proper

ABB Inc. instructions and manuals, otherwise injury or damage may result.

POSSIBLE PROCESS UPSETS

Operation and maintenance must be performed only by qualified personnel and only after securing

equipment controlled by this product. Adjusting or removing this product while it is in the system may

upset the process being controlled. Some process upsets may cause injury or damage.

NOTICE

The information contained in this document is subject to change without notice. ABB Inc. reserves the

right to make minor changes to this publication, such as company name & logos as well as other minor

corrections, without necessarily changing the publication number.

ABB Inc., its affiliates, employees, and agents, and the authors of and contributors to this publication

specifically disclaim all liabilities and warranties, express and implied (including warranties of

merchantability and fitness for a particular purpose), for the accuracy, currency, completeness, and/or

reliability of the information contained herein and/or for the fitness for any particular use and/or for the

performance of any material and/or equipment selected in whole or part with the user of/or in reliance

upon information contained herein. Selection of materials and/or equipment is at the sole risk of the user

of this publication.

This document contains proprietary information of ABB Inc. and is issued in strict confidence. Its use, or

reproduction for use, for the reverse engineering, development or manufacture of hardware or software

described herein is prohibited. No part of this document may be photocopied or reproduced without the

prior written consent of ABB Inc.