Epson ActionNote 880 Handleiding productinformatie
Blader online of download pdf Handleiding productinformatie voor {categorie_naam} Epson ActionNote 880. Epson ActionNote 880 11 pagina's. Product information guide
Ook voor Epson ActionNote 880: Cartridges vervangen (2 pagina's)
Front View
suspend/resume button
trackpad
* These parts function only with the optional audio card installed
Rear Panel and Left Side
security
external
keyboard or
mouse pod
*Available only with the optional internal fax/modem installed
Notebook Specifications
CPU and Memory
Upgradable 486 microprocessor installed
CPU
in a PGA socket; includes 8KB of internal
cache in write-back mode and integrated
math coprocessor
System speed
Fast speed and slow speed (8 MHz)
available; speed selection through Setup
diskette
drive
hard disk drive
compartment
PC card
DC-in pod
slots
EPSON ActionNote 800 Series
4MB RAM soldered on the system board;
Memory
configuration may include additional
memory module; expandable up to 24MB
using a 4,8,16, or 20MB memory
expansion module
128KB Flash ROM device containing the
ROM
system and video BIOS and Setup
program code
512KB DRAM supports resolutions up to
Video RAM
640 x 480 in 256 colors on the color LCD
and up to 1024 x 768 in 16 colors or
800 x 600 in 256 colors on external monitor
Cache
8KB internal; supports 256KB of external
cache on a CPU daughterboard; selectable
through Setup
Clock/
Real-time clock, calendar, and CMOS
calendar
RAM; backed up by internal battery
Controllers
Chips and Technology® 65535 video
Video
controller; 32-bit local bus interface to the
microprocessor; supports enhanced video
modes on an external monitor; supports
resolutions from 640 x 480 in 256 colors on
the color LCD and up to 1024 x 768 in 16
colors on an external monitor; automatic
external monitor detection; simultaneous
display with LCD screen using Fn F10
command or software
Built-in super I/O controller for one
Diskette drive
internal 3.5-inch diskette drive; supports
720KB and 1.44MB formats
Hard disk
Built-in super I/O controller has interface
to one 2.5-inch, IDE internal hard disk
drive; automatically recognizes and
configures drives up to 19 mm high that
support the IDE interface
PCMCIA
Built-in Vadem® VG-468 controller for two
stacked slots; supports two Type I or II
cards, or one Type III; PCMCIA version
2.01 and JEIDA 4.1 compatible; supports
low power and suspend modes; supports
hot insertion (including ExCA standards);
register compatible with Intel 82365SL
Interfaces
Auto-sensing, 15-pin, D-sub, female
External VGA
connector for analog monitor
Parallel
Centronics® compatible; 25-pin, D-sub,
female connector; standard S-bit parallel;
supports standard (AT compatible) and
bidirectional (PS/2 compatible) modes
AN800-1