Architectural Area Lighting PROS Providence Small Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Architectural Area Lighting PROS Providence Small. Architectural Area Lighting PROS Providence Small 15 pagina's. Led upgrade kit

Pagina afdrukken
INSTALLATION INSTRUCTIONS
WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER
REPRODUCTIVE HARM. THOROUGHLY WASH HANDS AFTER INSTALLING, HANDLING, CLEANING OR OTHERWISE TOUCHING THIS PRODUCT.
TABS
FITTER CAP
BALLAST
CONNECTORS
WIRE CONNECTIONS
(BY OTHERS)
INSTALLATI O N STEPS:
1. TURN OFF POWER.
2.
MAKE WIRE CONNECTIONS FROM INCOMING WIRE
LEADS TO FIXTURE. (WHITE TO COMMON, BLACK
TO HOT AND GREEN TO GROUND). NOTE: ASSEMBLY
MUST BE GROUNDED TO THE INCOMING EQUIPMENT
GROUND SUPPLY.
3.
SLIP FIXTURE OVER POLE, AND SECURE FIXTURE TO
POLE WITH (3) 5/16-18 x 1/4" SET SCREWS.
4.
INSTALLATION COMPLETE.
BALLAST SERVICING:
1.
TURN POWER OFF.
2.
ROTATE FITTER CAP COUNTER CLOCKWISE, UNTIL
FREE FROM FIXTURE. (SEE FITTER CAP DETAIL)
3.
LIFT FITTER CAP WITH BALLAST FROM FITTER AND
UNPLUG ALL CONNECTORS.
4.
SERVICE BALLAST.
5.
PLUG IN ALL CONNECTORS AND CAREFULLY PLACE
BALLAST INTO FITTER.
6.
ROTATE FITTER CAP CLOCKWISE, UNTIL TABS SNAP
SECURELY INTO FITTER.
7.
BALLAST SERVICING COMPLETE.
14249 Artesia Blvd. P.O. Box 1869
(714)994-2700 fax(714)994-0522
La Mirada, CA 90638-1869
LATCH
DOME
LAMP (REFERENCE)
(BY OTHERS)
FIXTURE
1
INCOMING
WIRE LEADS
3" O.D. POLE
CLOSED
FITTER CAP DETAIL
LAMP SERVICING:
1.
TURN OFF POWER.
2.
PULL LATCH AND RAISE DOME AS SHOWN.
3.
INSTALL LAMP (BY OTHERS). AND
CLOSE DOME AND LATCH SECURELY.
4.
LAMP SERVICING COMPLETE.
1
5/16-18 X 1/4"
SET SCREW S/S
(3) P/N 93007472
PROS DIR
OPEN
DATE
APPRVD
PART NO.
DATE
REV.
CATALOG NUMBER
A96489