Ayra ITA3D 600 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ayra ITA3D 600. Ayra ITA3D 600 14 pagina's. Rgb ilda laser with effect wheel
Pagina afdrukken
Technical specifications
TYPE: ITA3D 600
Laser diodes
Type ITA3D 600:
- 100mW red laser (wavelength: 635nm)
- 100mW green laser (wavelength: 532nm)
- 400mW blue laser (wavelength: 450nm)
- mixed output: 500mW white max.
Tech specs:
- scanset: 25 kpps high-speed optical scanner with a maximum angle of +/- 30 degrees
- working modes: auto, sound-active, master/slave, DMX-512, ILDA
- graphics and effects: 128 beam show and animated graphic show patterns with 3D animation
- high-efficiency 3D optical grating system for unique 3D lighting effects
- hanging bracket, for use with a lighting stand or truss system
- built-in microphone with adjustable sensitivity
- pattern size adjustable (small-large)
- ILDA control with DB25 connectors
- DMX-control with 3-pin XLR connectors
- DMX-control: 12 channels
- Power supply: 100-250V AC, 50/60 Hz
- Power consumption: 50 Watt
- dimensions: 200 x 235 x 130 mm
- weight: 4.5 kg
Laser class and licensing
This laser has the capability to perform with a power of maximum 500mW theoretically. However, the optics
of the laser have a small influence on the beam output power, thus reducing the maximum power slightly. In
practice, this device falls under Class 3B.
Class 3B and Class 4 lasers are able to cause serious injury to your audience when used incorrectly. It is
therefore strongly recommended that only skilled laser operators and technicians install and operate this
device.
Class 3B and Class 4 lasers can be used for audience scanning in a safe way, but only when used by a
skilled laser operator or technician.
There are no official laser laws or licenses to operate or own a laser device. However, there is specific
guidance issued by the Health and Safety Executive in the form of a document called HS(G)95 The
Radiation Safety of Lasers Used for Display Purposes. HS(G)95 outlines a number of detailed points to
consider when using lasers for lightshow purposes. Class 3B and 4 laser products are required to have
several specific safety features as part of their design. These features are laid out in the British Standard on
Laser Product Safety BS/EN 60825-1 and are a requirement of the product meeting CE approvals.
Connectors and wiring schematics:
DMX-connections:
Electrical wiring:
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0
Creation date + author initials: 05-12-2013 RV Revision date + author initials: 18-02-2014 RV