Cisco 3560V2 - Catalyst 48 10/100 Poe Gegevensblad - Pagina 11
Blader online of download pdf Gegevensblad voor {categorie_naam} Cisco 3560V2 - Catalyst 48 10/100 Poe. Cisco 3560V2 - Catalyst 48 10/100 Poe 20 pagina's. Cisco catalyst 3560v2-24ps: specifications
Pagina afdrukken
For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON)
●
software agent supports four RMON groups (history, statistics, alarms, and events).
Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet takes from source to
●
destination.
All nine RMON groups are supported through a SPAN port, which permits traffic monitoring of a single port, a
●
group of ports from a single network analyzer or RMON probe.
Domain Name System (DNS) provides IP address resolution with user-defined device names.
●
Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading
●
from a centralized location.
Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.
●
Multifunction LEDs per port for port status; half-duplex and full-duplex mode; and 10BASE-T, 100BASE-TX,
●
and 1000BASE-T indication as well as switch-level status LEDs for system, redundant power supply, and
bandwidth use provide a comprehensive and convenient visual management system.
LLDP Location Support enables location based services, such as providing an end device location,
●
emergency responder, location based QoS, location based VLAN assignment, and location based power
management.
Cisco Network Assistant
Cisco Network Assistant is a PC-based network-management application with a user-friendly GUI. Available at no
cost, Cisco Network Assistant can be downloaded from Cisco.com.
Cisco Network Assistant is a free, Windows-based application that simplifies the administration of networks of
●
up to 250 users. It supports a wide range of Cisco Catalyst intelligent switches from Cisco Catalyst 2960
through Cisco Catalyst 4506. With Cisco Network Assistant, users can manage Cisco Catalyst switches plus
launch the device managers of Cisco integrated services routers (ISRs) and Cisco Aironet WLAN access
points.
The easy-to-use graphical interface provides both a topology map and front-panel view of the switch.
●
Cisco AVVID (Architecture for Voice, Video and Integrated Data) wizards need just a few user inputs to
●
automatically configure the switch to optimally handle different types of traffic: voice, video, multicast, and
high-priority data.
A security wizard is provided to restrict unauthorized access to applications, servers, and networks.
●
Upgrading the Cisco IOS Software on Cisco Catalyst switches is a simple matter of pointing and clicking, with
●
one-click upgrades.
Cisco Network Assistant supports multilayer feature configurations such as routing protocols, ACLs, and QoS
●
parameters.
Multidevice and multiport configuration capabilities allow administrators to save time by configuring features
●
across multiple switches and ports simultaneously.
The user-personalized interface allows modification of polling intervals, table views, and other settings.
●
Alarm notification provides automated e-mail notification of network errors and alarm thresholds.
●
CiscoWorks LAN Management Solution (LMS)
CiscoWorks LAN Management Solution (LMS) is a suite of powerful network management tools that simplify the
configuration, administration, monitoring, and troubleshooting of Cisco networks. It integrates these capabilities into
a world-class solution for improving the accuracy and efficiency of your operations staff, while increasing the overall
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Data Sheet
Page 11 of 20