Accusys ACD-76301 Snelle installatiehandleiding - Pagina 11

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Accusys ACD-76301. Accusys ACD-76301 12 pagina's. Raid box

ACCUDUAL

Follow the instructions provided below to configure the system interface setup

depending on type of RAID box

 Configure the SCSI channel

The Default SCSI configuration as

shown on the figure. The default SCSI

ID is 6.

If you intend to configure the SCSI

channel to different ID number, please

refer the table. And leave others setting

as default if unnecessary.

The SCSI ID 7 usually reserved for

SCSI host controller, please avoid

using ID 7 for ACD-76301 box for

preventing the ID conflict.

 Configure the IDE channel

An IDE bus supports 2 devices in one

channel. The default IDE is set as

"master".

If you intend to configure the device to

other setting, please remove and

change the cap according the

instruction figure.

 Mount or Remove hard drive

Install hard drive into disk tray and secure the hard

drive by screws from the bottom.

SW1

OFF ON OFF ON OFF ON OFF ON

SW2

OFF OFF ON ON OFF OFF ON ON

SW3

OFF OFF OFF OFF ON ON ON ON

ACD-76300/ACD-76301/ACD-76302 RAID BOX