Sharp CD-E200H Bedieningshandleiding - Pagina 34
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-E200H. Sharp CD-E200H 41 pagina's. Mini component system
Pagina afdrukken
Timer and sleep operation (continued)
CD-E200H
ENGLISH
" Sleep operation
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed and then within 8 seconds, press the MEMORY/
SET button.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (
or
) button.
(Maximum: 3 hours - Minimum: 5 minutes)
3:00
2:00
(cancel)
0:05
3
Within 30 seconds, press the MEMORY/SET button.
4
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
The volume will turn down 30 seconds before the sleep opera-
tion finishes.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 8 seconds.
E-27
" To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
1
2
Sleep timer setting
1:30
1:00
Caution:
0:10
0:15
0:30
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
Set the sleep time (see left, steps 1 - 3).
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 25 - 26).
Timer playback setting
5 minutes - 3 hours
Sleep operation will
automatically stop.
03/2/10
CD-E200H(H)E3.fm
Timer playback
start time