Accuweight AW-BS001 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Accuweight AW-BS001. Accuweight AW-BS001 3 pagina's. Digital bathroom scale

Pagina afdrukken

Battery Installation

1. This scale operates on 1 "CR2032" lithium battery (pre-installed). Note: If you

have recently received your scale, you will not need to install a battery.

2. Remove screw (or screws) from the battery compartment cover on the bottom

of the scale and remove the cover.

3. Remove the old battery from the compartment. (pre-installed)

4. Place the new battery (not included) with the "+" sign up to the battery compartment.

5. Replace the battery compartment cover and screw(s).

6. Replace the batteries if "Lo" appears on the display, or the readings grow dim or

irregular.

NOTE: please recycle or dispose of batteries per local regulations.

WARNING: Batteries may pose a choking hazard. Do not let children handle

batteries.

PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak.

Remove the batteries if the scale will not be used for a long period of time.

Bathroom Scale Placement

WARNING:

Do not place your scale on carpet, as this will cause the readings to be inaccurate

and inconsistent.

For the most accurate readings, we strongly recommend placing your bathroom

scale on a hard, level surface. For the best results, we recommend placing the

scale on surfaces such as: ceramic tiles, hardwood, stone, or concrete.

General Weighing Operation

1. Please see "Battery Installation" section of this manual for installation instructions.

Also, some models have a static cling label on the lens to prevent scratching.

Please remove before use.

2. The scale has been set at the factory to read weight in pounds (lb). You may

select kilogram (kg) or stone (st lb) (1 stone = 14 pounds) units of measurement

by pressing the button on the bottom of the scale.

3. Please p

lace the

scale on flat, hard surface. Carpeted or uneven floors may

affect accuracy.

4. Step on the scale (disregarding the reading) and step off. This process insures

the scale is set and now ready for use. Do this whenever the scale is moved. At

all other times step straight onto the scale.

-2-

5. Step onto the scale platform and remain still. The display will count up to your

weight. Your weight is now displayed.

6. The scale will turn off automatically after approximately 10 seconds.

AW-BS001

Bathroom scale

Max.400lb/180kg/28st 8lb

d= 0.2lb / 0.1kg

1×3V CR 2032

Made in China

In Case Of Difficulty

1. Place your feet in the same position every time weigh yourself. Stand still during

measurement.

2. Weigh yourself without clothing whenever possible. Clothes can vary in weight.

3. Move the scale to a location where it won't be bumped. If your scale is bumped

while being activated or while in use, an inaccurate reading may occur.

4. For the most consistent readings, weigh yourself at the same time of a day.

Allow for weigh functions due to food or during in your system.

5. The maximum capacity of this scale is 400 lbs/ 180 kgs / 28 st 8 lbs. Should "0_Ld"

appear on the display during a weighing, this indicates that the maximum weighing

capacity of the scale has been exceeded. Remove the weight immediately;

otherwise, permanent damage may occur.

Precautions

1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a

mild soap. Never use detergents, excess water, treated cloths, harsh cleaning

agent, or sprays. Do not attempt to lubricate or open scale casing as this will

void your warranty.

2. Although your scale is designed to be maintenance-free, it contains sensitive

electronic parts. Avoid rough treatment. Do not drop, kick, or jump on it. Treat it

with care to ensure

the best performance.

3. This scale is designed to read weights between 11 and 400 lbs / 5 and 180 kgs

11 lbs and 28 st 8 lbs. To prevent damage, do not place more than 400 lbs / 180 kgs

/ 28 st 8 lbs on it.

Unit selector switch

-3-

/ 0 st