Samsung 73V Gebruikershandleiding - Pagina 36

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Samsung 73V. Samsung 73V 47 pagina's.

Q & A

Question

How can I change the frequency?

How can I adjust the resolution?

How can I set the Power Saving

function?

How can I clean the outer

case/LCD Panel?

Self-Test Feature Check

Your monitor provides a self test feature that allows you to check whether your monitor is functioning

properly.

Self-Test Feature Check

1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer.

3. Turn on the monitor.

If the monitor is functioning properly, you will see a box with a border and text inside as shown in

the following illustration: The three boxes inside the border are red, green and blue.

Failure of any of the boxes to appear indicates a problem with your monitor. This box also appears

during normal operation if the video cable becomes disconnected or damaged.

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after using the previous procedure, check your video controller

and computer system; your monitor is functioning properly.

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the

driver used. (Refer to the computer or the video card manual for

details.)

Windows ME/XP/2000 : Set the resolution at the Control

Panel→Display→Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the

computer or the screen saver. (Refer to Windows/Computer Manual).

Disconnect the power cord and then clean the monitor with a soft cloth,

using either a cleaning solution or plain water.

Do not leave any remains of the detergent nor scratch the case. Do not

allow any water to go inside the monitor.

Warning Messages

Answer

Environment

Useful Tips