Cisco 6800 Series Hardware-installatie - Pagina 15

Blader online of download pdf Hardware-installatie voor {categorie_naam} Cisco 6800 Series. Cisco 6800 Series 20 pagina's. Ip phone, multiplatform phones
Ook voor Cisco 6800 Series: Snelstarthandleiding (3 pagina's), Gebruikershandleiding (8 pagina's), Onderhoudshandleiding (8 pagina's), Gebruikershandleiding (14 pagina's), Handleiding voor probleemoplossing (12 pagina's), Snelstarthandleiding (4 pagina's), Gebruikershandleiding (22 pagina's), Snelstarthandleiding (4 pagina's), Installatiehandleiding (39 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Hardware Installation

This diagram shows how you seat the device on the screw heads.

• With the ceiling mount bracket: Hold the device with the lettering in the Cisco logo on the bottom and

turn slightly right. Align the slots on the underside of the device with the hooks on the bracket, press the

device into the bracket, and turn it left until the device is attached.

Step 8

Base station only: Plug the Ethernet cable into the LAN port.

Step 9

If required, plug the power adapter into the electrical outlet.

What to do next

Do one of these:

• Base station installation:

• Repeater installation:

• Manual configuration:

Sign into the Administration Web Page

• Automatic configuration:

Sign into the Administration Web Page

Add a Repeater

Mount the Base Station or Repeater on the Wall

and

Configure the Base Station

and

Start Handset Registration

Hardware Installation