Siemens EH8 SB1 Series Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens EH8 SB1 Series. Siemens EH8 SB1 Series 16 pagina's.
Ook voor Siemens EH8 SB1 Series: Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken

Press the

symbol several times until the indicator for the

desired function appears on the left of the screen.

Then select the desired setting in the programming panel.

Care and cleaning

The advice and warnings contained in this section aim to guide

you in cleaning and maintaining the hob, so that it is kept in the

best possible condition

Hob

Cleaning

Clean the hob after each use. This prevents food remains left

on the surface from burning. Wait until the hob is cold enough

before attempting to clean it.

Only use cleaning products specifically designed for glass-

ceramic hobs. Follow the instructions provided on the

packaging.

Do not use:

Abrasive products

■

heavy-duty cleaners, like oven sprays and stain removers

■

Pads that may scratch

■

High-pressure or steam cleaners

■

Fixing malfunctions

Malfunctions are usually due to small details. Before calling the

Technical Assistance Service, you should consider the

following advice and warnings.

Indicator

Malfunction

none

The electric power supply has been cut off. Use other electrical appliances to check whether there has been a

The appliance has not been correctly con-

nected following the connection diagram.

Electronic system malfunction.

The control panel is damp or an object is

flashes

resting on it.

* If the warning persists call the Technical Assistance Service.

Do not rest hot pans on the control panel.

Press the

symbol again and hold for more than

4 seconds.

The settings will have been correctly saved.

Quit

To leave the basic settings, turn off the hob at the main switch.

Glass scraper

Remove dried-on food remains using a glass scraper.

Release the scraper safety catch

Use the blade to clean the hob surface

Do not attempt to clean the hob surface with the base of the

scraper. This could result in scratching.

ã=

Risk of injury!!

The blade is extremely sharp. Risk of cuts. Protect the blade

when not in use. Replace the blade immediately when any

imperfections are found.

Care of the appliance

Apply an additive to protect and preserve the hob. Follow the

advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the

indications below:

Use only slightly soapy hot water

■

Do not use sharp or abrasive products

■

Do not use a glass scraper

■

Solution

power cut.

Check that the appliance has been connected correctly according to

the connection diagram.

If in the above checks, the malfunction is not resolved, contact the

Technical Assistance Service.

Dry the control panel area or remove the object.