Siemens TL.. Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens TL... Siemens TL.. 16 pagina's.

Pagina afdrukken

Cleaning and care

The information in this section provides help on how best to

care for your hob.

Suitable maintenance and cleaning products can be purchased

from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills from

burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for ceramic. Follow

the cleaning instructions on the packaging.

Never use:

Undiluted washing-up liquid

■

Detergent intended for dishwashers

■

Scouring agents

■

Rectifying faults

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

Indicator

Fault

Blank

There is no power supply.

The controls are damp or an object is

is flash-

resting on them.

ing

Electronic fault.

"§

number

The electronics have overheated and

"ƒ

have switched off the corresponding

hotplate.

The electronics have overheated and

"...

have switched off all hotplates.

The hotplate was in operation for too

"‰

long and has switched itself off.

* Do not place hot pans close to or on the control panel

Harsh cleaning agents such as oven spray or stain remover

■

Abrasive sponges

■

High-pressure cleaners or steam jet cleaners

■

Ground-in dirt can be best removed with a glass scraper,

available from retailers. Please note the manufacturer's

instructions.

You can also obtain a suitable glass scraper from our after-

sales service or from the e-Shop.

Hob surround

To prevent damage to the hob surround, please observe the

following instructions:

Use only warm, soapy water.

■

Do not use harsh or abrasive agents.

■

Do not use the glass scraper.

■

Action

Check the household fuse for the appliance. Check whether there is a power

cut by trying other electronic appliances.

Dry the controls or remove the object.

Switch the appliance off and back on again after about 30 seconds using

either the household fuse or the circuit breaker in the fuse box. Contact the

after-sales service if this appears in the display again.

Wait until the electronics have cooled down sufficiently. Then touch a control

for the hotplate.*

Wait until the electronics have cooled down sufficiently. Then touch any con-

trol.*

You can switch the hotplate back on again immediately.