Calling Features
WebDialer
This procedure applies to the Cisco Unified IP Phone 6911 only.
WebDialer allows you to call contacts from the Cisco Unified CM Directory. Your system administrator sets
up this feature for you.
Call Cisco Directory Contact Using WebDialer
This procedure applies to the Cisco Unified IP Phone 6911 only.
Procedure
Step 1
Sign in to your User Options web pages.
Step 2
Select User Options > Directory and search for a coworker.
Step 3
Select the number that you want to dial.
Step 4
If this is your first time using WebDialer, review the preferences on the Make Call page.
Step 5
Select Dial.
The call is now placed on your phone.
Step 6
To end a call, select Hang up or hang up from your phone.
Manage WebDialer Preferences
This procedure applies to the Cisco Unified IP Phone 6911 only.
Procedure
Step 1
Initiate a call using WebDialer to access the Make Call page.
The Make Call page displays the first time that you use WebDialer, after you select the number that you want
to dial.
Step 2
Select one of the following options from the Make Call page:
• Preferred language—Determines the language used for WebDialer settings and prompts.
• Use preferred device—Identifies the Cisco Unified IP Phone (Calling device) and directory number
• Do not display call confirmation—If selected, the WebDialer Make Call page will not display the next
• Disable Auto Close—If selected, the call window does not close automatically after fifteen seconds.
(Calling line) that you will use to place WebDialer calls. If you have one phone with a single line, the
appropriate phone and line are automatically selected. Otherwise, choose a phone and/or line. If you
have more than one phone of the same type, it will be specified by device type and MAC address.
time Web Dialer is used. Calls will automatically be dialed after clicking on a contact from the Cisco
Directory.
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
WebDialer
27
Pagina afdrukken