Ricoh Pro C900 Installatiehandleiding - Pagina 17

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Ricoh Pro C900. Ricoh Pro C900 24 pagina's. Color server options
Ook voor Ricoh Pro C900: Brochure & specificaties (6 pagina's), Brochure & specificaties (8 pagina's), Addendum voor gebruikers (24 pagina's)

Pagina afdrukken
Ricoh Pro C900 Installatiehandleiding
13. Plug the power cord into the power source and turn the machine
14. Complete each MFP options' (DOS, FFC and VM Card) installation

Configuring the Machine

Fiery Controller Settings
•
•
Service Program Mode Settings
•
•
•
•
•
•
•
•
•
User Tools Settings
System Settings: General Features
•
•
•
•
Colour High Volume Production System - Installation Guide
Pro C900
Interface Settings) contact the branch L4 connectivity
technician to confirm that @Remote is ready to be installed.
on.
procedure by referring to the Pro C900 / Pro C900s Service Manual
one at a time.
Input the Fiery controller settings; Fiery IP address and subnet
mask
Open Internet Explorer and browse to the Pro C900. Input the
following information using the configuration tool;
Set Fiery date and time
o
PS: Set default paper size to metric
o
PS: Convert paper sizes from letter/tabloid
o
PCL: Set paper size for system pages to metric
o
Enter service program mode:
Perform the Peripheral Height Adjustment using SP5-805-16.
SP-4303 / APS Special Paper Size Detect / Set to 1
If the customer is going to replace the TCRUs, enable the
following SP modes so that the PM parts alarm is activated; SP5-
062-001 to 0 and SP7-956-001 to 1.
SP5-187 PM Counter Print Out in UP / Set to On
Activate the PM Alarm alert: Set SP5-501-001 to 400K
Input the following contact numbers;
Service telephone number: SP5-812-001
o
Service fax number: SP5-812-002
o
Consumables Ordering Number: SP5-812-003
o
Back up all address book data to the Installation SD Card using
SP5-846-051
To enable hole-punching in the SR5000 when Z-Folding, enable
SP6-904.
The user may want to turn the panel key sound off
Check with the customer and set the function priority to suit the
customer needs
Set the default finisher output trays for copier, document server
(Pro C900s only) and printer
Set the ADF original table to "Lift when [start] key is pressed" (Pro
C900s only).
A4/A3
Page 17 of 24