Ricoh Pro C9200 Tips - Pagina 17

Blader online of download pdf Tips voor {categorie_naam} Ricoh Pro C9200. Ricoh Pro C9200 49 pagina's. Using the auto color diagnosis function
Ook voor Ricoh Pro C9200: Gebruiksaanwijzing (48 pagina's), Gebruiksaanwijzing (24 pagina's), Cip Opleiding (16 pagina's), Handmatig (32 pagina's)

Pagina afdrukken

RICOH Iro C9200 Series Tips on High Quality Irint

The number of envelopes that can be loaded in each tray

When loading envelopes to a tray, see the following upper limit that can be loaded.

240×332 ㎜

120×235 ㎜

110× 220 ㎜

Other custom size

[Region A]

Vertical: 100.0–330.2 ㎜

Horizontal: 139.7–487.7 ㎜

[Region B]

Vertical: 3.94–13.00 inches

Horizontal: 5.50–19.20 inches

*1 Please note that envelopes with more than "paper weight 5 (220gsm)" cannot be used if its width is

139.7mm or less.

*2 For some envelopes, even if the "x-y" indicated above is 10 mm (0.4 inches) or more, it is possible

to increase the number of sheets loaded a little more. However, if a paper jam occurs, reduce the

number of sheets loaded.

Caution:

・ Flatten curls as much as possible. Curl per envelope should not exceed 5mm (0.2 inches).

・ Set the difference of the stack height of the bottom of the envelope (x) and the stack height of the

flap portion (y) to be 10 mm (0.4 inches) or below.

Setting envelope to Vacuum Feed LCIT RT5120 Tray

(1) Remove the 2 plates in the bottom of Vacuum Feed LCIT RT5120 Tray. It will be easier to

remove if you widen the side fences to the left and right.

Bypass Tray

(Tray A)

April.15, 2019

2-Tray LCIT

(Tray 3 to 8)

20 - 40

(as a guide)

─