Ricoh Pro L5130 Handleiding veiligheidsinformatie - Pagina 10
Blader online of download pdf Handleiding veiligheidsinformatie voor {categorie_naam} Ricoh Pro L5130. Ricoh Pro L5130 32 pagina's. Additional function 2
Ook voor Ricoh Pro L5130: Handleiding Rip-instellingen (44 pagina's), Snel aan de slag (32 pagina's), Handmatig (12 pagina's)
Pagina afdrukken
1. Safety Information for This Machine
• Be sure to disconnect the plug from the wall outlet at least once a year and check for the
following:
• There are burn marks on the plug.
• The prongs on the plug are deformed.
• If any of the above conditions exist, do not use the plug and consult your dealer or service
representative. Use of the plug could result in fire or electric shock.
• Be sure to disconnect the power cord from the wall outlet at least once a year and check for the
following:
• The power cord's inner wires are exposed, broken, etc.
• The power cord's coating has a crack or dent.
• When bending the power cord, the power turns off and on.
• Part of the power cord becomes hot.
• The power cord is damaged.
• If any of the above conditions exist, do not use the power cord and consult your dealer or
service representative. Use of the power cord could result in fire or electric shock.
• This machine uses two power cords. To stop the power supply of the machine completely,
remove both power plugs. Unless both power plugs are removed, fire or electric shock may
result.
• The capacity of power in this machine is 32 A and 6,000 W with both cords combined.
Connect each cord to separate power sources with independent breakers. If you connect to an
electrical outlet that is connected to the same breaker, the breaker may cut off power.
• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs
create an unstable connection that can result in unsafe buildup of heat.
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around
the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
8