Cisco Unified 7912G Referentiehandleiding - Pagina 10

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Cisco Unified 7912G. Cisco Unified 7912G 20 pagina's. Ip talk series
Ook voor Cisco Unified 7912G: Gebruikershandleiding (21 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (25 pagina's), Telefoonhandleiding (46 pagina's), Snelle referentie (2 pagina's), Netwerkinstellingen configureren (34 pagina's), Overzicht (20 pagina's), Installatiehandleiding (8 pagina's), Snelle referentie (4 pagina's)

Pagina afdrukken
Cisco Unified 7912G Referentiehandleiding
To enable/Modify Call forwarding from a
Remote location
Dial the number for Remote Access to
•
Call Forwarding or dial your phone number and
press * at the message
Enter your complete telephone number + #. If your
•
phone is configured as an extension-only (i.e.,
non-DID) line, enter your organization's complete
main telephone number + * + your extension
number + #.
Enter your telephone password + #
•
Enter the new forwarding number + #. For
•
external numbers use the Outside Access Digit,
usually 9.
After hearing the verification, hang up
•
To Disable Call forwarding using the Menu
Press the CFwdAll softkey
•
Press the EndCall softkey
•
To Disable Call forwarding using star Codes
Lift the handset and dial 73*
•
After hearing the verification, hang up
•
To Disable Call forwarding from a
Remote location
Dial the number for Remote Access to Call
•
Forwarding or dial your phone number and press
* at the message
Enter your complete telephone number + #
•
Enter your telephone password + #
•
Press ##
•
After hearing the verification, hang up
•

Call foRWaRD (bUsY)

Call Forward (Busy) forwards calls to another number
when you are already on a call.
To enable/Modify Call forward (busy)
Lift the handset and dial 76*
•
Enter the extension or phone number for the
•
forwarding destination followed by #. For external
numbers, use the Outside Access Digit.
6