Cisco 2950 - Catalyst Switch Aan de slag handleiding - Pagina 16

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 29 pagina's. Long-reach ethernet switches
Ook voor Cisco 2950 - Catalyst Switch: Oplossingshandleiding (17 pagina's), Product Bulletin (3 pagina's), Product ondersteunings bulletin (5 pagina's), Handboek migratie (25 pagina's), Product ondersteunings bulletin (6 pagina's), Gegevensblad (20 pagina's), Handmatig (19 pagina's)

Connecting to DC Power

To connect the Catalyst 2950G-24-EI-DC or Catalyst 2950ST-24 LRE 997 switch to a DC-input power

source, follow the steps in this section.

Equipment That You Supply

You need to supply these tools and equipment:

• Ratcheting Phillips-head torque screwdriver

• Panduit crimping tool

• 6-gauge copper ground wire

• Four leads of 18-gauge copper wire

• Wire stripping tool

Follow these steps:

Remove the ground lug and the two number-10-32 screws from the switch (on the rear panel

Step 1

of the Catalyst 2950G-24-EI-DC switch and on the front panel of the Catalyst 2950ST-24

LRE 997 switch).

If your 6-gauge ground wire is insulated,

Step 2

strip it to 0.5 inch (12.7 mm).

0.5 inch (12.7 mm)