ACU-RITE 00595 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ACU-RITE 00595. ACU-RITE 00595 10 pagina's. Professional wireless weather station with wind sensor & atomic clock

Pagina afdrukken

ACCESSING THE BATTERY COMPARTMENTS

Main Unit: Open the battery cover located on the back of the unit. Remove the screw set

provided for wall mount use and insert 3 fresh "AA" batteries. (Batteries not included).

Replace battery door cover.

Thermo-Hygrometer Sensor: Rotate and pull

the top casing from the bottom cone by turning

the unit upside down and rotating counter-clock

wise until casing pulls apart. Slide the battery

compartment cover (located on the side of the

sensor) off. Insert 2 fresh "AA" batteries

(batteries not included). Replace the battery

compartment cover and rotate the top back

into the bottom piece.

Wind Sensor: Twist off the top from the bottom

and open the battery cover located on the

bottom of the sensor. Insert 2 fresh "AA"

batteries. (Batteries not included). Replace

battery door cover by putting battery cover on

half way and then sliding into place. Twist on

the top to the bottom piece.

NOTE:

1. When installing batteries, always install

according to the polarity indicated in the

battery compartment.

2. When installing or replacing batteries do

not mix battery types or old batteries with

new batteries.

Top Casing

Battery

Door

Batteries

Bottom Cone

Top Casing

Battery

Door

Bottom Casing

INITIAL SET-UP

POWER ON:

Once the batteries have been inserted into the wireless sensors, they will automatically begin

transmitting data.

Wireless Reception

The main unit has wireless signal reception

icons in the temperature display area. If there

are a low number of "bars" present, you may

experience no temperature or wind display

( "--" ) . In either case, you may need to

relocate one or both of the units. If most or

all 4 of the bars are present, wireless

reception is good and no action is required.

no reception

OPERATION

After the main unit and the wireless sensor are

both powered on and wirelessly synchronized,

no further input is required. The atomic clock

will automatically re-synchronize occasionally to

ensure the clock is accurate.

Atomic Clock Reception Icon

14 Day Learning Mode

This weather station has a patent pending

fourteen day learning mode calibration

process. During this learning mode the

weather station will make altitude calculations

that may affect the accuracy of the forecast.

Once the 14 day learning mode process is

complete, the learning mode icon will

disappear and the weather forecast should be

ready for superior operation.

SIGNAL RECEPTION:

OUTDOOR WIRELESS SENSORS: As soon as the main unit is powered up, it will begin to

search for the outdoor wireless sensor signals. While in search mode, the bar icons will be

animated. During this time, all of the outdoor values will be shown as "---" until the weather

data has been received correctly. To force a signal search, press and hold the "CHANNEL"

button for 3 seconds.

RADIO CONTROLLED ATOMIC CLOCK:

The Radio Controlled Atomic Clock (RCC) signal from Fort Collins, CO is relayed through the

wireless thermo-hygrometer sensor. If the RCC signal has successfully been received, " "

will be displayed. If the RCC signal has not been received, only the icon " " will be displayed.

The RCC signal is best received at night and may take up to 24 hours to be received initially.

Thermo-Hygrometer

Wind Reception

Sensor-reception

Icon

great reception

Forecast Icon

This feature gives you the predicted weather

forecast for the next 12 to 24 hours based on an

advanced algorithm that includes barometric

pressure and temperature. This weather station

will provide the most accurate forecast that a

single station weather instrument can provide.

Optional Rain Gauge

Reception Icon