Cisco MERAKI MR72 Hardware installatiehandleiding - Pagina 8
Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco MERAKI MR72. Cisco MERAKI MR72 16 pagina's.
Ook voor Cisco MERAKI MR72: Installatiehandleiding (20 pagina's)
Pagina afdrukken
built-in web server by browsing to http://ap.meraki.com.
Alternatively, browse to http://10.128.128.128.
3.
Click on the "Static IP Configuration" tab. Log in. The default
user name is "admin". The default password is the AP's serial
number, with hyphens included (e.g., Q2BD-551C-ZYW3).
4.
Configure the static IP address, net mask, gateway IP address
and DNS servers that this AP will use on its wired connection.
5.
If necessary, reconnect the AP to the LAN.
3.5 Collect Tools
You will need the following tools to perform an installation:
- Flat-head screwdriver
- Drill with appropriate bits for mounting wall anchors (if mounting to a
wall)
- Phillips screwdriver
Tin snips (if mounting with hose clamps)
-
- Power screwdriver with 5/16" (8 mm) nut driver, Phillips & flat heads
(recommended)
3.6 Collect Additional Hardware for Installation
- Network cables with RJ45 connectors long enough for your particular
mounting location
- 802.3at PoE power source (either PoE switch or Meraki 802.3at PoE
Injector)