Cisco Codec C Series Aan de slag handleiding - Pagina 32

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Codec C Series. Cisco Codec C Series 35 pagina's. Telepresence conference system
Ook voor Cisco Codec C Series: Aan de slag handleiding (41 pagina's), Gebruikershandleiding (44 pagina's), Aan de slag handleiding (32 pagina's), Aan de slag handleiding (42 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco Codec C Series Aan de slag handleiding
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
The Settings menu on the Touch
controller
All settings are not available on all products; therefore the
menu items shown to the right may or may not be present on
your system.
You will find a complete description of the Touch controller
menus in the User guide for your video conference system.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces
Configuration
Settings | System Information
System Information
Call Status
Camera Control & Settings
Display Settings
Ringtone & Sound Settings
Background
Administrator Settings
Restart
Back
| Administrator Sett
Date, Time & Location
Call Settings
Network Settings
EMC Resilience Mode
Reset
Back
IP Settings
H323 Settings
SIP Settings
Provisioning
Multiway
Appendices
Appendices
The Settings menu
•
System Information:
See and overview of the system configurations.
•
Call Status:
See and overview of the call parameters when in call (e.g.
protocols, transmit and receive rates, packet loss).
•
Camera Control & Settings:
Set the camera parameters.
•
Display Settings:
Select brightness, color temperature and DVI mode for the
main video display.
•
Ringtone & Sound Settings:
Select a ring tone, the ring tone volume and key tone.
•
Background:
Select a background picture for your Touch controller and main
video display.
•
Administrator Settings:
See below.
•
Restart:
Select this option to restart the system.
The Administrator Settings menu
•
Date, Time & Location:
Configure date and time settings.
•
Call Settings:
Configure the default bit rate and auto answer settings.
•
Network Settings:
See below.
•
EMC Resilience Mode:
Select this option to change the Touch
controller's resilience to electromagnetic noise present.
•
Reset:
Select this option for a complete factory reset. All your settings
will be reset.
The Network Settings menu
| Administrator Sett
•
IP Settings:
Configure the IP settings.
•
H323 Settings:
•
SIP settings:
Configure the SIP settings.
•
Provisioning:
Start the provisioning wizard.
•
Multiway:
Insert the address of the Multiway server.
32
Configure the H.323 settings.
www.cisco.com