Cisco TelePresence MX700 Handmatig - Pagina 32

Blader online of download pdf Handmatig voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 45 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Snelstarthandleiding (12 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (29 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Installatiehandleiding (29 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco TelePresence MX700 Handmatig

Commands

Table of contents
Introduction

UserInterface Extensions Widget SetValue

This command sets the value of the given widget, and the UserInterface
Extensions statuses are updated accordingly. If the value is out of range, the
Create a user interface
command returns an error.
USAGE:
API for in-room control
xCommand UserInterface Extensions Widget SetValue Value:
Widgets
where
Value
Command reference
Command reference
WidgetId
Troubleshooting
Tips and tricks

UserInterface Extensions Widget UnsetValue

Examples
This command empties the value of the given widget, and the UserInterface
Extensions statuses are updated accordingly. The user interface is notified that
the widget is no longer selected.
USAGE:
xCommand UserInterface Extensions Widget UnsetValue WidgetId:
where
WidgetId
D15358.01 APRIL 2016
Collaboration Endpoint software
version 8.1
© 2016 Cisco Systems, Inc.
All rights reserved.
WidgetId:
WidgetId
: String (0, 255)
The value of the widget. The range of values depends on the widget
type.
: String (0, 40)
The unique identifier for the widget.
WidgetId
: String (0, 40)
The unique identifier for the widget.

UserInterface Extensions Clear

This command deletes all user interface extensions (widgets) from the video
system.
USAGE:
xCommand UserInterface Extensions Clear
Value

UserInterface Extensions List

Use this command to list all user interface extensions (widgets) that exist on the
video system.
USAGE:
xCommand UserInterface Extensions List
32