Cisco ASA 5545-X Software Handleiding - Pagina 15

Blader online of download pdf Software Handleiding voor {categorie_naam} Cisco ASA 5545-X. Cisco ASA 5545-X 37 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5545-X: Handleiding voor installatie-instructies (13 pagina's), Snelstarthandleiding (13 pagina's), Snelstarthandleiding (15 pagina's)

Pagina afdrukken

Cisco ASA and Firepower Threat Defense Reimage Guide

sync

tftpdnld

The ASA image downloads and boots up to the CLI.

See the following information:

• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other

models always use the Management 1/1 interface.

• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.

• sync—Saves the network settings.

• tftpdnld—Loads the boot image..

Example:

Example for the ASA 5555-X:

rommon 2 > interface gigabitethernet0/0

rommon 3 > address 10.86.118.4

rommon 4 > netmask 255.255.255.0

rommon 5 > server 10.86.118.21

rommon 6 > gateway 10.86.118.1

rommon 7 > file asalatest-smp-k8.bin

rommon 8 > set

ROMMON Variable Settings:

ADDRESS=10.86.118.3

NETMASK=255.255.255.0

SERVER=10.86.118.21

GATEWAY=10.86.118.21

PORT=GigabitEthernet0/0

VLAN=untagged

IMAGE=asalatest-smp-k8.bin

CONFIG=

LINKTIMEOUT=20

PKTTIMEOUT=4

RETRY=20

rommon 9 > sync

Updating NVRAM Parameters...

rommon 10 > tftpdnld

Example for the ASA 5506-X:

rommon 2 > address 10.86.118.4

rommon 3 > netmask 255.255.255.0

rommon 4 > server 10.86.118.21

rommon 5 > gateway 10.86.118.21

rommon 6 > file asalatest-lfbff-k8.SPA

rommon 7 > set