Cisco PIX 501 Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco PIX 501. Cisco PIX 501 20 pagina's. Data sheet
Ook voor Cisco PIX 501: Gegevensblad (8 pagina's), Snelstarthandleiding (21 pagina's), Snelstarthandleiding (20 pagina's), Snelstarthandleiding (18 pagina's)
Pagina afdrukken
Make sure that one of the PCs has TCP/IP installed and is configured to obtain an IP
Note
address automatically through DHCP. This allows the PC to communicate with the
PIX 501 and the Internet as well as run the PDM Startup Wizard.
4
Power On the PIX 501
4
3
2
1
0
Follow these steps to power on the PIX Firewall:
Connect the small, round connector of the power supply cable to the power connector on the
Step 1
rear panel.
Connect the AC power connector of the power supply input cable to an electrical outlet.
Step 2
The PIX 501 does not have a power switch. Completing Step 2 powers on the device.
Note
P O W E R
C O N S O L
E
3 .3 V 4 .5
A
Cisco PIX 501
Power supply
5