Cisco RSP7000 Installing - Pagina 5
Blader online of download pdf Installing voor {categorie_naam} Cisco RSP7000. Cisco RSP7000 26 pagina's. Upgrade kit in the cisco 7000 series routers
Ook voor Cisco RSP7000: Installatie- en configuratiehandleiding (48 pagina's)
Pagina afdrukkenWhat is the RSP7000CI?
The RSP7000CI, shown in Figure 4, consists of a printed circuit board attached to a metal carrier.
The RSP7000CI has no user-configurable jumpers or switches, and its faceplate contains no LEDs.
The RSP7000CI is distinguishable only by the label on its faceplate, which reads 7000 Series
Chassis Interface. (See Figure 4.) The RSP7000CI provides the environmental monitoring and
power supply monitoring functions for the Cisco 7000 series chassis. The RSP7000CI isolates the
CPU and system software from chassis-specific variations.
Caution
ON to the chassis. The RSP7000CI does not support online insertion and removal (OIR). You must
install the RSP7000CI in the appropriate chassis' 7000 CI slot. (See Figure 1 on page 2, for the Cisco
7000, or Figure 2 on page 3 for the Cisco 7010.)
Note
"Software Prerequisites" on page 7.
The functions of the RSP7000CI are as follows:
•
Report backplane type
•
Report arbiter type
•
Monitor power supply status
•
Monitor fan/blower status
•
Monitor temperature sensors on the RSP7000
•
Provide router power up/down control
•
Provide power supply power-down control
Figure 4
To prevent system problems, the RSP7000CI must not be removed or installed with power
For the appropriate Cisco IOS version required for the RSP7000CI, refer to the section
RSP7000CI
Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers
Product Overview
5