Cisco UCS B440-M1 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Cisco UCS B440-M1. Cisco UCS B440-M1 12 pagina's. Bios policy configuring
Ook voor Cisco UCS B440-M1: Configuratie (8 pagina's)

Pagina afdrukken

Virtual Interface Adapter in Service Profile

Configuring the service profile for the Virtual Interface Adapter requires an understanding of how the

software assigns the adapters for the B440−M1:

•

vNICs and vHBAs are assigned to the Virtual Interface Adapter implicitly by the user or

automatically by UCSM during LS association.

•

During the LS association, the Virtual Interface Adapter is mapped to physical mezzanine cards.

vNIC/vHBA Placement

Default placement of vNICs/vHBAs:

•

If the 2 adapters are present, by default, the B440−M1 adapter assigns vNICs/vHBAs starting from

the slot on the right (slot 1) and equally distributes the total number between the 2 adapters. For

example: If you have 4 vNICs (i.e., 1, 2, 3, and 4), it will assign 1 and 2 on the slot 1 adapter and 3

and 4 on the slot 0 adapter.

Specific placement of vNICs/vHBAs:

•

If more control is needed on how to place a vNIC/vHBA to a specific adapter, you can use the

concept of Virtual Interface Adapter .

Service Profile

Perform these steps:

Creation of the service profile is not new to Cisco UCS and can be referenced in Configuring Service

Profiles for details on creation.