Epson FX-880+ Beknopte handleiding - Pagina 21

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Epson FX-880+. Epson FX-880+ 33 pagina's. Epson serial impact dot matrix printers
Ook voor Epson FX-880+: Installatiehandleiding (33 pagina's), Brochure & specificaties (24 pagina's), Handmatig (18 pagina's), Specificaties (2 pagina's), Lees dit eerst (2 pagina's), Referentiehandleiding (34 pagina's)

4. Pull both paper set levers forward until

the paper guides retract and lock open to

allow paper loading.

5. Take a stack of paper (up to 150 sheets)

and fan it. Next, tap the side and bottom

edges of the paper on a flat surface to

even up the stack.

6. Insert the paper stack printable side

down along the left paper guide.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

7. Adjust the right paper guide so that it

matches your paper's width and lock it

in place. Make sure the position of the

guide allows the paper to move up and

down freely.

If you are loading envelopes, push back

the envelope levers as shown below.

8. Push back the paper set levers to clamp

the paper or envelopes against the guide

rollers.

The cut-sheet feeder automatically loads

paper when the printer receives data.

If the first line on your page appears too high

or low, you can adjust its position using the

Micro Adjust function. See "Micro Adjust

Function" for more information.

Single Sheets with the High-Capacity Cut-Sheet Feeder (2/2)