3Com Router 3035 Release Release - Pagina 4

Blader online of download pdf Release Release voor {categorie_naam} 3Com Router 3035. 3Com Router 3035 9 pagina's. 3000 dsl series
Ook voor 3Com Router 3035: Release Release (7 pagina's), Gegevensblad (4 pagina's), Gegevensblad (4 pagina's), Gegevensblad (4 pagina's)

Pagina afdrukken

1: 3C

HAPTER

Hardware Accessories

Installation

System Access

SNMP

6000/3000 DSL F

OUTER

AMILY

Incorrect packet received

It is necessary to wait 3 minutes and then repeat the command.

IMPORTANT: For 3Com 6000 Router Family running V2.00 router software. If you

upgrade your router software via tftp and set the destination filename to

secure.bin then tftp will always fail on the first attempt with the following output:

<3Com>tftp <server ip address> get <filename> secure.bin

The file system currently exists. Overwrite it?[Y/N]:y

File will be transferred in binary mode.

Downloading file from remote tftp server, please wait...\

Incorrect packet received

DO NOT use secure.bin as the destination file. Issue the following command

instead

<3Com>tftp <server ip address> get <filename> r6x02_01e.bin

Issue

boot main r6x02_01e.bin

the main image then reboot the router.

For Router 3032/3035 ADSL over ISDN products, standard RJ-11 to RJ-11 cable is

provided for an external splitter with RJ-11 connection. This cable can also be used

for RJ-45 connection if the external device has this type of interface available only.

Issuing the

display current-configuration

DSL Family will result in some packet loss during heavy traffic times. Please

refrain from issuing the current configuration command during peak usage

periods.

The following command does not work:

ftp-directory

user-name ftp-directory flash:

Router does not allow the configuration of FTP server with Radius

Authentication None option. FTP Anonymous login is not supported. A

username and password is required for FTP access.

The FTP server does not support filenames containing spaces. Use underscores

instead of spaces for character separation.

snmp-agent trap enable entity

To enable RFC 2737 (Entity MIB) traps use

command, then undo any unwanted traps types individually.

To disable Entity MIB traps, use

then enable any other wanted traps types individually.

V 2.01

ELEASE

OTES

OFTWARE

from the system view to set r6x02_01e.bin as

. Change the FTP directory to the default:

command missing

undo snmp-agent trap enable

command on the Router 3000

Undo Local-user user-name

Local-user

snmp-agent trap enable

command,