Ariel UNDERMOUNT SINK Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Ariel UNDERMOUNT SINK. Ariel UNDERMOUNT SINK 2 pagina's.

UNDERMOUNT SINK INSTALLATION GUIDE

STEP 5 - PREPARE & SET BOLTS

Fill in the small holes surrounding the sink basin with epoxy.

Immediately place the top of the bolt (PART A) in the hole

with the epoxy. Allow su cient dry time & follow the package

directions on the epoxy before moving to the next steps,

typically 12 to 24 hours.

STEP 7 - PREPARE BASE CABINET

Using a caulking gun, apply silicone around the top of the base

cabinet.

STEP 9 - VERIFY COUNTERTOP PLACEMENT

If installed correctly, the countertop should look like the image

above.

Need Further Assistance?

For more help, please contact us and one of our trusted

experts will be more than happy to provide guidance.

STEP 6 - ATTACH UNDERMOUNT CLIPS

After following recommended drying time,

attach the undermount clips (PART B) facing down, place the

washer (PART C) on the clips & use

the wing nuts (PART D) to secure in place. Apply silicone to

the wing nut for added stability.

STEP 8 - SET COUNTERTOP IN PLACE

Carefully place the countertop, with the sink attached, onto

the cabinet making sure to line up and center over the cabinet.

There should be ½" overhang on each side of the cabinet and

the front. The countertop edge does not wrap around the base

cabinet, it sits on top. Press ﬁrmly down and wipe away any

excess silicone immediately.

STEP 10 - SET BACKSPLASH

After the vanity is in place, use a caulking gun to apply silicone

to the back and bottom unﬁnished sides of the backsplash.

Press ﬁrmly down and back to set in place. Remove any excess

silicone.

WWW.ARIELBATH.COM

800-509-5070

9:00am - 5:00pm (PST)

Monday - Friday

P 2