Toshiba 22BL502B DIGITAL Series Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba 22BL502B DIGITAL Series. Toshiba 22BL502B DIGITAL Series 50 pagina's. Digital series

Pagina afdrukken

Connecting an HDMI® or DVI Device to the HDMI Input

The HDMI input on your TV receives digital audio and

uncompressed digital video from an HDMI source device

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

These input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital

form from EIA/CEA-861-D–compliant [1] consumer electronic

devices (such as a set-top box or DVD player with HDMI or

DVI output).

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI ter-

minal. For proper operation, it is recommended that you use

an HDMI cable with the HDMI Logo (

• If your HDMI connection is capable of 1080p and/or

your TV is capable of refresh rates greater than 50Hz, you

will need a Category 2 cable. Conventional HDMI/DVI cable

may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• To view the HDMI device video, press SOURCE button to

select HDMI1.

01_MB62_[GB]_IDTV_(IB_INTERNET)_(22145LED_3910UK)_BRONZE19_10075894.indd 15

To Connect a DVI Device

Connect an HDMI-to-DVI adaptor cable (HDMI type A connec-

tor) to the HDMI input socket and audio cables to the SIDE AV

socket, using the supplied Side AV connection cable's RED

and WHITE inputs (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

•

An HDMI-to-DVI adaptor cable transfers video only.

Separate analogue audio cables are required.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the

TV ﬁ rst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device ﬁ rst, and then the TV.

- 15 -

26.11.2011 18:30:46