Toshiba 24/32 WL3C Series Gebruiksaanwijzing - Pagina 31

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Toshiba 24/32 WL3C Series. Toshiba 24/32 WL3C Series 50 pagina's.

Toshiba 24/32 WL3C Series Gebruiksaanwijzing
No picture
• TV is not receiving any signal. Make sure the correct
source has been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are in doubt, consult your dealer.
No sound
• Check if the TV sound is muted. Press the Mute
button or increase the volume to check.
• Sound is coming from only one speaker. Check the
balance settings from Sound menu.
• Check Sound Output option is set correctly from
Sound menu.
Remote control - no operation
• The batteries may be exhausted. Replace the
batteries.
• The batteries maybe inserted incorrectly. Refer to
the section "Inserting the Batteries into the Remote".
No signal on an input source
• It is possible that no device is connected.
• Check the AV cables and connections from your
device.
• Check the device is switched on.
The Image is not centered in VGA source
To have your TV automatically center the image, enter
the PC Position menu in Picture menu, highlight
Autoposition and press OK. Wait for it to finish. In
order to set the position of the image manually you
can use H Position and V Position options. Select
the desired option and use Left and Right directional
buttons on the remote to set.
Recording unavailable
To record a programme, you should first correctly
connect a USB storage device to your TV, while the
TV is switched off. You should then switch on the TV to
enable recording feature. If you cannot record, check
the storage device is correctly formatted and there is
sufficient space.
USB is too slow
If a "USB disk writing speed too slow to record"
message is displayed on the screen while starting a
recording, try restarting the recording. If you still get
the same error, it is possible that your USB storage
device does not meet the speed requirements. Try
using a different USB storage device.

PC Input Typical Display Modes

The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions.
Index

AV and HDMI Signal Compatibility

Source
Back AV
YPbPr
HDMI
(X: Not Available, O: Available)
In some cases a signal on the TV may not be displayed
properly. The problem may be an inconsistency with
standards from the source equipment (DVD, Set-top
box, etc. ). If you do experience such a problem please
contact your dealer and also the manufacturer of the
source equipment.
English - 30 -
Resolution
Frequency
1
640x480
2
640x480
3
800x600
4
800x600
5
800x600
6
800x600
7
1024x768
8
1024x768
9
1024x768
10
1152x864
11
1280x768
12
1360x768
13
1280x960
14
1280x1024
15
1280x1024
16
1400x1050
17
1440x900
18
1440x900
19
1920x1080
Supported Signals
PAL
SECAM
NTSC4.43
NTSC3.58
480i, 480p
60Hz
576i, 576p
50Hz
720p
50Hz,60Hz
1080i
50Hz,60Hz
480i, 480p
60Hz
576i, 576p
50Hz
720p
50Hz,60Hz
1080i
50Hz,60Hz
24Hz, 25Hz,
1080p
30Hz, 50Hz,
60Hz
(**) Limited Models Only
60Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
75Hz
60Hz
Available
O
O
O
O
O
O
O
O
O
O
O
O
O