Pioneer Pure Vision PDP-425CMX Brochure & specificaties - Pagina 4
Blader online of download pdf Brochure & specificaties voor {categorie_naam} Pioneer Pure Vision PDP-425CMX. Pioneer Pure Vision PDP-425CMX 6 pagina's. 42" hd plasma display fan control
Ook voor Pioneer Pure Vision PDP-425CMX: Commandoreferentiehandleiding (25 pagina's), Nieuwsbrief (2 pagina's)
Pagina afdrukken
PIONEER PDP Features
Dual Screen Function: Upgraded for professional use.
The new Pure Drive Pro image processing engine greatly improves processing of not only the main image, but also
the sub-image in dual image mode. As a result, a variety of dual-image displays not previously possible can now be
shown, allowing presentations and product promotions that are impressive and persuasive.
Standard Dual Screen Mode
Remote control operation permits the use of Picture-in-Picture (P-in-P)
and Side-by-Side modes. With P-in-P you can shift the position of
the sub-image among four locations. Side-by-Side switches between
Intelligent Dual Screen Mode
The P-in-P mode permits a number of display variations. You can select
four sizes of P-in-P sub-images and you can set the transparency of
the sub-image from 0 to 80%.
Select four sub-image sizes
and the visual mode.
Banner PIP mode displays on-screen titles
You can easily display titles prepared in PowerPoint
presentation software
®
or other programs on the screen. You can choose four positions for
the titles: top, medium top, medium bottom, and bottom. The transparency
of the on-screen titles can also be varied.
* PowerPoint is a registered trademark of Microsoft Corporation.
The transparency of the on-screen titles
can also be varied.
5
the left and right images, and in addition to the swap function, you can
also switch the audio via remote control.
Upgraded Side-by-Side mode
You can switch easily between Side-by-Side and P-out-P modes with
the Integrator Menu. It is also possible to select three horizontal aspect
ratios for dual image, full screen display.
Side-by-Side
Picture-out-Picture
Sub-Image Detection
If the sub-image input signal is lost during P-in-P display, this mode shuts
off, and is automatically selected again when the signal is restored (operates
only with P-in-P mode).
Ordinary
PDP-425CMX
Designing Section 1, Engineering Department 3, PDP Product Engineering Division, Home Entertainment Business Group, PIONEER CORPORATION
Video Wall can display up to 25 images.
Pioneer makes it easy to configure multi-monitor video walls. Possible configurations are 2x2, 3x3, 4x4 and 5x5. Two display modes are
provided: Normal, for showing data and text, enlarges the image so that no elements are hidden by bezels, while Adjusted, for pictures
and video, enlarges the image as a single whole unit, as though looking through a window. Video Wall functions include Power On Delay,
ABL Link, Auto ID Setting and Repeat Timer. Video Wall is an internal function, not needing external processing equipment.
5x5
3x3
Adjusted mode
Normal mode
Power On Delay
This function automatically varies the powering up of each display to reduce
the load on the power source.
Pioneer's industry-first Seamless Orbiter alleviates burn-in
Conventional orbiter modes reduce ghosting by moving the displayed image by one pixel at regular intervals. Because viewers
can notice the movement, it interferes with their viewing. The PDP-425CMX has an improved Seamless Orbiter function,
which moves the entire image in extremely small steps of less than a pixel. The most effective orbiting pattern was adopted
based on a variety of simulations, achieving the maximum possible mitigation of ghosting without viewers noticing the process.
Conventional orbiter modes
The entire image moves one dot at a time.
The movement is easily noticeable.
Tomohisa Fujita
Senior Assistant Manager
ABL Link
The ABL (Auto Brightness Limiter) Link function sets the brightness of each
display at a uniform level (operates only with 2x2 and 3x3 configurations).
Auto ID Setting
Automatically sets an ID for each display connected via a combination
control cable to permit simpler error-free setting (operates only with 2x2
and 3x3 configurations).
Repeat Timer
This function allows the repetition of two settings. For example, you can set
the timer to display a video image on the full screen for three minutes, then
a PC image divided into four screens for six minutes. This is continuously
repeated (operates only with 2x2 and 3x3 configurations).
Seamless Orbiter mode
Image moves in extremely small steps, so viewers
do not notice that it is changing.
6