Xerox 6100BD - Phaser Color Laser Printer Aan de slag handleiding - Pagina 15

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 34 pagina's. Disk overwrite installation and usage
Ook voor Xerox 6100BD - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (32 pagina's), Brochure & specificaties (4 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Release Release (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (11 pagina's), Installatie- en bedieningshandleiding (8 pagina's)

Xerox 6100BD - Phaser Color Laser Printer Aan de slag handleiding

DocuColor printer specific changes

The iGen3 110 with SmartSize Technology

New Platform for iGen3

iGen3 updates

11
This release introduces the Xerox iGen3 110 with SmartSize
Technology. This new configuration offers new levels of
productivity to customers running certain sheet sizes.
♦ Feeds and images 8 ½ x 11 or A4 sheets at up to 110
impressions per minute.
♦ With SmartSize technology, sheet sizes below 11 x 17
inches or A3 run at varyiung rates automatically,
depending upon how many images can fit on the
photoreceptor.
A new hardware platform is included with the DocuSP 4.2
version of the Xerox iGen3 system.
The Sun fire v890 features the new UltraSPARC IV 64 bit
processor with Chip Multi-threading technology offering two
threads per processor chip. With dual-threaded architecture,
each UltraSPARC IV processor consists of two virtual
processors with shared memory.
The platform configuration is as follows:
♦ 1 CPU/Memory board with 2 dual-threading processors, 16
dual inline memory modules (DIMMs) for 8 GB of memory.
♦ IDE I/O controller for support of DVD/CD-RW drives
♦ 3 x N+1 redundant hot-swappable 240VAC power supplies
♦ 3 x 73 GB hard disk drives, upgradeable to 6
♦ Integrated Fibre Channel dis subsystem
♦ 16 MB external cache per chip
♦ GPIO combo graphic adapter and dual network interface
card
♦ Enhanced diagnostics
♦ For the DocuSP 4.2 product, the iGen3 CMYK source
profile has been improved to more closely resemble
SWOP rendition. This enables customers who are used to
SWOP workflows to more closely emulate SWOP output.
♦ The SWOP Gamut does not fully utilize the iGen3 gamut.
The new SWOP Plus color profile sets hues within the
SWOP gamut to continue to simulate a SWOP press.