Xerox 6180DN - Phaser Color Laser Printer Handmatig - Pagina 26

Blader online of download pdf Handmatig voor {categorie_naam} Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 pagina's. 26-ppm monochrome/ 20-ppm color
Ook voor Xerox 6180DN - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Specificaties (4 pagina's), Handmatig (28 pagina's)

Stock Export change

¨ When exporting the stock library, the system will always

export both pre-installed and user defined entries.

¨ The only option the operator needs to select is the directory

for the export file.

¨ The system administrator may now change the default router

setting. Previously, this was done when the Solaris operating

system and DocuSP software were installed, or required a

service call to change. The Default Router option is available

on the Setup pull-down menu on the DocuSP UI.

¨ When the Xerox service representative loads the license file,

all of the licenses are now automatically enabled and

activated. In previous releases, the Xerox Service

Representative would need to access each licensable

feature in the License Manager, and select Activate and

Enable.

DocuSP 3.6 to 3.7 Differences Document