Xerox 6180DN - Phaser Color Laser Printer Handmatig - Pagina 17

Blader online of download pdf Handmatig voor {categorie_naam} Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 pagina's. 26-ppm monochrome/ 20-ppm color
Ook voor Xerox 6180DN - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Specificaties (4 pagina's), Handmatig (28 pagina's)

Two-Stage Resource-Based Scheduling

DocuSP 3.8 and 4.0 to 4.1 Differences Document

Limits, Constraints, and Considerations

♦ The VPC Filter is not supported on single-queue

systems such as the Nuvera Office Printer because

DocuSP does not support any filters on single

queue systems. The DocuSP GUI does not display

the VPC Filter settings on single-queue systems.

♦ The VPC Filter cannot be setup on a streaming

queue. The DocuSP GUI does not allow this

because crash recovery of filtered streaming jobs

does not work with the current architecture.

♦ The Generic Filtering Mechanism (GFM) does not

provide a method for stringing filters together;

therefore, only one filter can be applied to a queue.

♦ DocuSP's job forwarding mechanism is not

supported.

♦ The VPC Filter is not supported in DocuSP Remote

Workflow (DRW).

DocuSP 4.2 provides a mechanism to:

♦ Determine all the resources required by a RIP-input

job before scheduling the job for printing.

♦ Allow the customer to choose between this new

scheduling mode and the existing modes.

♦ Prevent a job from being erroneously scheduled in

the event that some of the required media is

unavailable.

The scheduling modes that are available under

DocuSP 4.2 are:

♦ First-in, first-out (FIFO)

♦ Resource-Based (RBS)

♦ Enhanced Resource-Based (Enhanced RBS)

The default job-scheduling mode is RBS for all systems

except the Nuvera Office Printer. The default for

Nuvera is Enhanced RBS. RBS and Enhanced RBS

only apply to RIP-input jobs. Scan-input jobs (available

only on systems with a scanner) are not affected. Nor

are streaming jobs affected. Enhanced RBS is only

performed on PCL, PS, PPML, and PDF jobs. If

Enhanced RBS is in effect, all other jobs are processed

using RBS.