Xerox 6180DN - Phaser Color Laser Printer Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 32 pagina's. 26-ppm monochrome/ 20-ppm color
Ook voor Xerox 6180DN - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Specificaties (4 pagina's), Handmatig (28 pagina's)

MICR application resources

4. Add the new library to the MX font library concatenation.

5. Because the names of the Xerox AFP MICR fonts are the

same as the IBM AFP MICR fonts, be careful not to overwrite

the original IBM fonts. You may need to reference them later.

New MICR implementation

1. Install the Xerox MICR fonts on the host AFP system.

2. Use the X0AE13 and X0AT13 fonts in your applications.

3. Refer to the code page and character set descriptions in the

IBM manuals and Xerox supplements.

4. Ensure that the MICR strings are contiguous. For example, if

you have a string of MICR font text and you insert a non-MICR

font in the middle of that string, the MICR font spacing is not

accurate when printed.

Custom MICR font application

1. Install Xerox MICR fonts on the host AFP system.

2. Substitute the Xerox MICR fonts for your existing custom

MICR fonts.

3. Modify the code page, if necessary.

4. Use the unchanged Xerox MICR character set to ensure the

integrity of the MICR line.

Existing Xerox MICR font application

1. Install Xerox MICR fonts on the host AFP system.

2. Remove the ! spacing from text strings. This character was

required for correct spacing in previous MICR technology.

However, the new set of MICR fonts uses relative metric

technology that inserts blank pel spacing automatically after

every two characters.

3. Code a PageDef to select the E13B font for MICR strings.

In order to print your MICR documents, you must have all of the

resources used in the application resident on your host system.

You must also have the Xerox AFP MICR fonts installed on your

system. (Refer to Installing Xerox AFP MICR Fonts for DocuPrint

MICR IPS Printers, delivered with your MICR system.)

MICR User Guide