Xerox 6180N - Phaser Color Laser Printer Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 32 pagina's. Color laser printer
Ook voor Xerox 6180N - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Handleiding voor beoordelaars (16 pagina's), Specificaties (4 pagina's)

MICR User Guide

Selecting PostScript fonts

To select a Xerox Postscript font, set the attributes for one of the

following:

•

Internal name: E13B

Point size: 9.12

•

Internal name: E13B9

Point size: 9

•

Internal name: CMC72510

Point size: 9.06

The Postscript E13B MICR font has the same character mappings

as the PCL fixed pitch E13B font. Refer to the Generic MICR

Fundamentals Guide for a complete listing of the character

mappings.

NOTE: The 300 dpi Type 3 PostScript font can be used in all

applications and queue resolution. In 600 dpi queueus and

applications, a slight change in corner rounding occurs with no

effect on readability or reject rate.

CAUTION: The 600 dpi Type 1 PostScript fonts can only be used

in 600 dpi queues with 600 dpi applications. Use of these fonts

with 300 dpi queueus or 300 dpi applications or resources cause

subtle distortions that degrade readability and are likely to cause a

high reject rate.

Selecting PCL fonts

The following HP PCL escape sequences are used to select the

Xerox PCL MICR fonts:

•

E13B 300 and 600 dpi font:

<ESC>(0U<ESC>(s0p8.00h9.00v0s0b0T

•

CMC7 600 dpi font (DP 100/115/135/155/180 EPS only):

<ESC>(1U<ESC>(s0p8h9.1v0s0b0T

Refer to the Generic MICR Fundamentals Guide for a complete

listing of the fixed pitch E13B and CMC7 MICR font characteristics

and character mappings. The character mappings relate the input

character to the printed character.

If both the 300 and 600 dpi E13B fonts have been loaded on the

printer, the font is selected based on the PCL Unit that was

specified. The default PCL Unit is 300.