Xerox WorkCentre Pro 128 Handleiding scannen - Pagina 5

Blader online of download pdf Handleiding scannen voor {categorie_naam} Xerox WorkCentre Pro 128. Xerox WorkCentre Pro 128 28 pagina's. Stand installation guide
Ook voor Xerox WorkCentre Pro 128: Installatiehandleiding (2 pagina's), Handleiding voor beoordelaars (12 pagina's), Brochure & specificaties (6 pagina's), Brochure & specificaties (6 pagina's), Installatiehandleiding (2 pagina's), Netwerkhandleiding (50 pagina's), Kaart voor snelle installatie (2 pagina's), Hardware installatiehandleiding (4 pagina's), Installatiehandleiding voor module met twee laden (4 pagina's), Installatiehandleiding omvormer (2 pagina's), Installatiehandleiding (2 pagina's), Hardware installatiehandleiding (2 pagina's), Handleiding voor installatie van de standaard (2 pagina's), Handleiding voor snelle netwerkinstallatie (7 pagina's)

Pagina afdrukken
Xerox WorkCentre Pro 128 Handleiding scannen
Purpose
This document is intended to help the support centers and analysts in enabling Networking and Scanning features for use on a M123/M128 device.
This document is not a substitute for the system administrator's guide or the user guide, rather it is intended to be used as a quick reference or
checklist when enabling the scanning features.
G
G
e
e
n
n
e
e
r
r
a
a
l
l
N
N
e
e
t
t
w
w
o
o
r
r
k
k
S
S
These are the minimal settings required to enable the device on the network.

General Network Setup

Field Name
Description
Host Name
The device's SMB Host Name.
Enable "TCP/IP"
Port by which TCP/IP client
Port
communicates with the TCP/IP server
Get IP Address
The Method used to get an IP address.
Examples are;
• DHCP or
• Manual,
• Etc.
IP Address
This is Sheeta's TCP/IP Address.
The IP Address is a unique address
that identifies a device in a network.
Page 5 of 28
e
e
t
t
u
u
p
p
Location
WUI :
Properties
WUI :
Properties
LUI :
System Settings
Settings
WUI :
Properties
LUI :
System Settings
Settings
WUI :
Properties
LUI :
System Settings
Protocol Settings
TCP/IP
Port Settings
System Settings
Network
Port Settings
Protocol Settings
TCP/IP
System Settings
Network
Protocols Settings
Protocol Settings
TCP/IP
System Settings
Network
Value
Ex: XRXxxxxxxxxxxxxxx
Default is DHCP Auto.
Note: If set for anything
other than Manual, skip
IP Address, Subnet
Mask and Gateway
fields.
_____._____._____._____
Ex: 192.168.1.50
701P42081