Xerox DocuTech 6135 Handleiding voor planning - Pagina 27
Blader online of download pdf Handleiding voor planning voor {categorie_naam} Xerox DocuTech 6135. Xerox DocuTech 6135 38 pagina's. Docusp version 3.6
Ook voor Xerox DocuTech 6135: Specificaties (2 pagina's), Aan de slag (28 pagina's), Handleiding voor planning (20 pagina's), Installatiehandleiding (2 pagina's), Handleiding voor planning (16 pagina's), Release Release (2 pagina's)
Pagina afdrukken
C.P. Bourg Document Finisher (BDFx)
System Dependencies and Prerequisites
Configuration Guide
Printer Configurations
IOT
STACKER
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
•
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
•
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
•
Due to the height of the bypass transport on DocuPrint it is
not possible to attach the BCFx without the BSR.
•
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
BYPASS
STACKER
TRANSPORT
4-3
Finisher Configurations
BDFx
BCFx
BDFx
BCFx
BDFx
SQEDG
BSR
BSR
BDFx
BSR
BDFx
SQEDG
BSR
BCFx
BDFx
SQEDG
BDFx
SQEDG
BCFx
BDFx