Yamaha DME32 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha DME32. Yamaha DME32 16 pagina's. Digital mixing engine
Ook voor Yamaha DME32: Handleiding voor hardware-instellingen (12 pagina's)
Pagina afdrukken
When a channel is soloed, "SOLO OFF" changes to "SOLO ON." This is convenient on
control windows where the input channels are organized into pages and it's not possible
to see all SOLO buttons simultaneously.
For components with five or more outputs (i.e., five or more bus level controls
per input channel), the bus level controls in the IN section can be scrolled up or
down by clicking the two arrow buttons shown here.
The parameter ranges for the Matrix Mixers are as follows.
Section
Parameter
Bus level
PHASE
IN
SOLO
ON/OFF
Fader
ON/OFF
OUT
Fader
For Matrix Mixer components with more than four inputs or outputs, channels are
arranged into pages consisting of four channels. Previously, channels were arranged
into pages consisting of six channels.
Range
Adjusts the level of each input channel sig-
Mute to +10.0 dB
nal that is fed to each output channel
NOR/REV
Inverts each input channel signal
ON/OFF
Solos each input channel
ON/OFF
Mutes each input channel
Mute to +10.0 dB
Adjusts the level of each input channel
ON/OFF
Mutes each output channel
Mute to +10.0 dB
Adjusts the level of each output channel
Description
DME32—V1.5 Owner's Manual Supplement
3