Yamaha YSP-CU2700 Snelle referentiehandleiding - Pagina 18
Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Yamaha YSP-CU2700. Yamaha YSP-CU2700 21 pagina's.
- 1. Important Safety Instructions
- 2. Supplied Accessories
- 3. Preparing Remote Control
- 4. Installing the Batteries
- 5. Recommended Place for Installation
- 6. Example for Installing the Unit
- 7. Installing the Stands
- 8. Raising the Antenna
- 9. Connecting a TV and BD/DVD Player
- 10. Turning on the Unit
- 11. Auto Setup for Appropriate Surround Effects (Intellibeam)
- 12. Installing the Intellibeam Microphone
- 13. Playback with Surround Sound
- 14. Enjoying Three-Dimensional Surround Sound (CINEMA DSP)
1 2 3 4 5
HDMI 1
TV
VOL (+/-)
SURROUND
STEREO
TARGET
18
e Playback
En
e
Playback
Enjoying TV
1
Select the desired TV channel.
2
Press the TV key.
• When audio is output from the TV speaker, set TV's audio output to an option
(output to the unit) other than TV. Refor to documentation supplied with TV for
more information.
• HDMI control function
You can use the TV remote control to operate this unit if your TV supports the
HDMI control function. See page 37 in the Owner's Manual.
Playing a DVD or BD
The following explains the playback procedure when this unit is
connected to the TV and BD/DVD player as shown in "Connecting
a TV and BD/DVD player" (p. 10).
1
Turn on the TV and BD/DVD player connected to this
unit.
2
Press the HDMI 1 key to select the BD/DVD player as
the input source.
HDMI1
3
Use the TV's remote control to switch the TV's input
to HDMI 1.
4
Play back a DVD or BD.
5
Press the VOL (+/-) key to adjust the volume.
6
Press the SURROUND, STEREO, or TARGET key
according to your preferences.
See page 40 in the Owner's Manual for details.
When this unit does not play back, check the following
• The unit and BD/DVD player are connected correctly.
• The audio output settings of the BD/DVD player is set to digital sound output
(bitstream).
• The TV's input is switched to this unit.
Input source name