Zanussi ZFT610X Instructieboek - Pagina 12

Blader online of download pdf Instructieboek voor {categorie_naam} Zanussi ZFT610X. Zanussi ZFT610X 16 pagina's. Freezer zft 610 x
Ook voor Zanussi ZFT610X: Gebruikershandleiding (16 pagina's)

Pagina afdrukken

Levelling

The appliance must be level. Level the appliance by

adjusting the two adjustable feet (1) at the front of the

appliance.

If required the washer (2) can be removed.

Door Reversal

If required the opening direction of the door can be

changed as follows:

Disconnect the appliance from the electricity supply.

Tilt the appliance backwards, resting the top edge of

the appliance on a stool or something similar.

Unscrew the adjustable feet situated on both sides at

the front (2 pieces). Remove the lower door hinge

plate by unscrewing the 2 retaining screws.

Remove the hinge pin from the bottom of the door.

Slot the hinge pin into the hole in the hinge plate.

Take the door off.

Refit the upper hinge pin into the opposite location.

Fit the door in place on the hinge pin.

Slot the hinge pin into the hole in the hinge plate and

relocate the hinge assembly to the opposite location

and refit using the retaining screws.

Refit the bottom hinge plate assembly on the oppo-

site side, taking care that the edge of the door is par-

allel with the side of the cabinet.

To reverse the handle proceed as follows:

Remove screw covers (if fitted) and handle retaining

screws. Remove blanking plugs on the opposite side

using a punch.

Relocate the handle to the opposite side and refit

retaining screws (covers if fitted), and push the plas-

tic plugs supplied with the instruction book into the

holes where the handle was previously fitted.