Aerco Esteem 399 Producthandleiding - Pagina 6
Blader online of download pdf Producthandleiding voor {categorie_naam} Aerco Esteem 399. Aerco Esteem 399 14 pagina's. Low nox gas fired boiler
General Requirements
Pre-Installation Items
General Requirements
Installation of the vent/air system must com-
ply with local codes and requirements and
with the National Fuel Gas Code NFPA 54,
ANSI Z223.1 for installations in the U.S. For
Installations in Canada, the installation must
comply with CSA B149.1 or B149.2.
Use ONLY Esteem Concentric Vent/Air System
Kit (P/N 39103) and components (see figure 3)
from AERCO International. Do not mix compo-
nents or joining methods from other sources.
WARNING!
D
O NOT MIX VENT COMPONENTS OR JOINING
METHODS FROM ANY OTHER VENT MANUFAC
AERCO I
TURER WITH
C
V
TEEM
ONCENTRIC
TO COMPLY WITH THIS REQUIREMENT COULD
CAUSE VENT FAILURE RESULTING IN LEAKAGE OF
FLUE PRODUCTS INTO THE LIVING SPACE OF THE
.
BUILDING
Elbow
Locking Band
Note: Mounting Hardware Not Shown
Figure 1: Concentric Vent/Air System Kit Components (P/N 39103)
2
'
E
NTERNATIONAL
S
/A
S
. F
ENT
IR
YSTEM
AILURE
D
O NOT CONNECT MORE THAN A SINGLE BOILER
INTO THE VENT
All penetrations of the vent/air system through
ceilings, floors or walls must be properly fire
stopped. Check with local codes and require-
ments regarding fire stops and vent penetra-
tions.
The vent/air system must not penetrate or be
routed through any active vent system or chim-
ney.
Vent/Air System Kit Components
Prior to installation of the vent/air system check
to ensure all parts required for the comple-
tion of the system are present. See Figure 1
-
for complete breakdown of concentric vent/
-
air system kit parts and Figure 3, for optional
S
components.
Termination Assembly
Vent/Air Adapter
WARNING!
/
.
AIR SYSTEM
Support Plate
GF-125V