Lenovo 62F0 Gebruikershandleiding - Pagina 24
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Lenovo 62F0. Lenovo 62F0 33 pagina's. Smart large format display
Pagina afdrukken
Maintenance
Important Safety Information
The power cable is dedicated to the smart screen. If you want to use a different power cable,
only use the power cable that matches the smart screen.
To prevent the machine from being damaged, do not use any cables other than the one provided
with the machine.
Please do not overload the power sockets and make sure that the sockets you use are certified by
the state for safety.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The power cable in the attachment is a three-socket power cable (with grounding protection).
Ensure that the ground terminal of the wall socket is properly grounded.
When wiring power cables, avoid channels to avoid trampling. You should also avoid areas that are
squeezed by other objects.
In case of a thunderstorm, pull out the power plug and cable plug and disconnect the device from
the antenna to avoid damage to the device.
The disconnection from line voltage is made by pulling the mains plug.
If the product is not used for a long time, please turn off the power and unplug the power plug.
If there is any abnormal sound or smell, please immediately turn off the power and unplug the power
plug. If it is confirmed as abnormal, do not continue to use it. Contact the product maintenance
personnel for repair as soon as possible.
Do not place inflammable and explosive objects on the machine, such as candles, electric stoves
and light bulbs should not be placed on or near the machine to avoid accidents.
Be careful of liquid and metal foreign matter falling into the machine. If any liquid or metal foreign
matter falling into the machine, please do not turn on the machine and contact professional
personnel to deal with it as soon as possible.
After the machine is moved from a low temperature environment to a warm area, dew may occur
inside the machine. In order to make the dew fully distributed and dry, it should be placed for 24
hours before powering on and starting up.
When moving the machine, it should be completed by two or more people, and the impact should be
avoided during the moving process, and the display screen should be specially protected.
In order to prevent accidental injury, the machine must be installed on a flat and stable ground
according to the installation instructions; or according to the wall mounting bracket installation
instructions to firmly fix the machine on the wall
Do not install the machine in an improper place, such as：
Do not install or place the machine near a heat source, or place it in direct sunlight, in a dusty
or humid environment.
Poor ventilation or closure.
Storage or use of flammable and explosive materials environment.
An environment with flammable or corrosive gases.
Do not expose the battery to excessive heat, such as sunlight or fire. Otherwise, it may explode.
Appendix A. Important Safety Information A-2