Lenovo 62F0 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Lenovo 62F0. Lenovo 62F0 33 pagina's. Smart large format display

Pagina afdrukken
Lenovo 62F0 Gebruikershandleiding

User controls

1.
:
a. Short press the button to shut down the product (system default)
b. After the system hibernation function is enabled: short press the power button to turn
off/wake up the screen, long press the power button to shut down the product.
2. Remote control receiver: Remote control signals (up/down 15° , left/right 30° , at least 5m of remote
control distance)
3. Light sensor: ambient sensing (5 options: 0%, 20%, 40%, 60%, 80%, 100%)
4. AC power switch
Startup & Shutdown
On/Off
The T86 is designed operate using 100 – 240V AC.
The button
on the panel and remote control is a unipolar switch, press this button to switch between power
on or standby state when the power is on.
The button
turn on the power.
Auto Stand-by
On android's homepage, the device does not enter standby mode, regardless of whether there is a valid input
signal.
On the non-Android homepage, if there is no input signal for more than 15 minutes in any signal source channel,
the machine will enter standby mode automatically.
Save before shutdown
When shut down, the machine will save the image and sound settings. When turned on again, the machine will
be in the state before it was shut down.
Timing switcher
Users can set the required on/off time.
OPS Switch
When the machine is installed with OPS module, the OPS will start automatically if the machine is
powered on at the OPS source or switched to the OPS source from another source. If the OPS does not
start on its own, it can be started manually. Please shut down OPS before shutting down the machine.
User can shut down the machine only after OPS is completely shut down, otherwise, the OPS will be
damaged due to forced shutdown.
After the OPS enters the closed state, the computer will enter the standby state if it does not take any
operation for a long time. If you need to use OPS again, you can restart the machine
Chapter 1 Getting started with your Smart Large Format Display (LFD) 1-5
on the back panel is the all-polarity switch，switch "O" to turn off the power, switch "I" to