Nikon D200 Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Nikon D200. Nikon D200 19 pagina's. Exploring
Ook voor Nikon D200: Brochure & specificaties (13 pagina's), Brochure (7 pagina's), Installatiehandleiding (2 pagina's), Brochure & specificaties (18 pagina's), Brochure (14 pagina's), Specificaties (2 pagina's), Functies en vergelijkingstabel (1 pagina's), Specificaties (2 pagina's), Bedieningshandleiding (23 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (25 pagina's), Snelstarthandleiding (9 pagina's)

When taking shots at depths deeper than 3 meters, the use of a "flash" is

necessary to regain the natural colours. The Nikon D200 can be combined

with a flash in 3 modes:

Manual flashes: using this mode, the power of the flash can be adjusted.

The camera will direct and synchronise the flash by means of the X-contact.

The result obtained can be observed on the LCD-screen. In case of an over-

or underexposure, the power of the flash or the distance to the subject has

to be adjusted and a new shot has to be made.

Autonomous flashes: some flashes have a light sensor which registers the

light reflected on the subject. When this sensor registers enough light, it

will automatically shut down the flash. Only by means of the diaphragm,

the flash light can be limited. To obtain a correct simulation, the diaphragm

used on the camera has to be adjusted on the flash. In case of an under- or

overexposure, a higher or lower value of the diaphragm has to be adjusted

on the flash.

TTL flashes: using this mode, camera and flash communicate and set the

right values of diaphragm and shutter speed to obtain the correct amount of

light needed for the shot. This mode can only be obtained by using a Nikon

D200 compatible flash or by installing the optional TTL converter.

Hugyfot Housing for

Nikon D200

User manual