Nikon NIKKOR Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Nikon NIKKOR. Nikon NIKKOR 33 pagina's. Af-s 28-300mm f/3.5-5.6g ed vr
Ook voor Nikon NIKKOR: Gebruikershandleiding (11 pagina's), Gebruikershandleiding (23 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (2 pagina's), Referentiehandleiding (42 pagina's), Gebruikershandleiding (21 pagina's)

Pagina afdrukken

When taking pictures

When taking panning shots

When taking pictures from

a moving vehicle

Setting the vibration reduction ON/OFF switch

ON: Vibration is reduced while the shutter-release button

OFF: Vibration is not reduced.

Setting the vibration reduction mode switch

First, set the vibration reduction ON/OFF switch ON, then select the following

mode:

NORMAL: The vibration reduction mechanism primarily

ACTIVE:

Notes on using vibration reduction

• After pressing the shutter-release button halfway, wait until the image in the

viewfinder stabilizes before pressing the shutter-release button the rest of the

way down.

• Due to the characteristics of the vibration reduction mechanism, the image

in the viewfinder may be blurred after the shutter is released. This is not a

malfunction.

• When taking panning shots, be sure to set the vibration reduction mode

switch to NORMAL. If the camera is panned in a wide arc, compensation for

camera shake in the panning direction is not performed. For example, when

panning the camera in a horizontal direction, vertical camera shake is reduced.

This stabilizes the image whilst allowing the desired panning effect to be realized.

• Do not turn the camera off or remove the lens from the camera while vibration

reduction is operating. Failure to observe this note could result in the lens

sounding and feeling as if an internal component is loose or broken when it is

shaken. This is not a malfunction. Turn the camera on again to correct this.

• With cameras featuring a built-in flash, vibration reduction does not function

while the built-in flash is charging.

• With autofocus cameras featuring an AF-ON button, vibration reduction does

not function when the AF-ON button is pressed.

Set the vibration reduction mode switch to

either NORMAL or ACTIVE.

Set the vibration reduction mode switch

to NORMAL.

Set the vibration reduction mode switch

to ACTIVE.

is pressed halfway and also at the instant the shutter

is released. Because vibration is reduced in the

viewfinder, auto/manual focusing and exact framing

of the subject are easier.

reduces camera shake, making smooth panning

shots possible.

The vibration reduction mechanism reduces

more noticeable camera shake, such as that

which occurs when taking pictures from a

moving vehicle. In this mode, the lens does not

automatically distinguish panning from camera

shake.