Discount Car Stereo AUX-JAG Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Discount Car Stereo AUX-JAG. Discount Car Stereo AUX-JAG 9 pagina's. Aux input installation guide for jaguar x308 & x100 with cd changer

Pagina afdrukken

5. Connect factory male plug to module (align marks on both plugs)

Do not wiggle or twist and ensure connection is snug.

Fig. 16

6. Connect module male plug (See Fig. 17) to CD changer connector (See Fig.

15)

Warning: Male right angle plug on our AUX-JAGR does not have alignment

mark (See Fig. 17); align imaginary mark shown in Fig. 17 with mark on CD

connector (See Fig. 15). Risk damaging connector/plug if this step is

ignored.

Noteworthy:

They are multiple Ai-Net connections in this area. To minimize connecting errors,

locate single thick black cable from CD auto

you will be working. Connecting module to wrong Ai-NET plug results in loss of power,

low or no playback etc.

Fig. 17

changer. This is the cable with which

Routing audio cable –

This section is intended to serve as a guide. Users are at liberty to route audio

cable to location of choice.

Start at rear window on driver's side. Use a pry tool or similar to open

small gap to allow audio cable (See Fig. 21) through and into trunk as

seen in Fig. 19 and 20

Fig. 19

2. Go into trunk and connect audio cable (See Fig. 21) to module female jack

(See Fig. 22).

Fig. 21

Audio cable

Applies to XJ

Fig. 20

Fig. 22

audio jack